Fejlen "Failed to load steamui.dll" har plaget Steam siden dets fremkomst og er desværre stadig til stede i dag. Og det er heller ikke altid Steams^(Steam) skyld – fra korrupte filer til manglende Windows-opdateringer^{(Windows Updates)} er der en række eksterne faktorer, der kan være ansvarlige.

Den gode nyhed er, at det normalt er ret nemt at rette, i modsætning til når Steam ikke starter^{(Steam fails to launch)} uden nogen fejlmeddelelse. Så her er de bedste måder at fjerne denne irriterende fejl og komme tilbage til at spille dine yndlingsvideospil igen.

Fix 1: Geninstaller Steam

Det meste af tiden er fejlen "Kunnet ikke indlæse steamui.dll" forårsaget af manglende eller beskadigede filer. Og den nemmeste måde at løse det problem på er at afinstallere og geninstallere Steam .

Du behøver ikke at bekymre dig om at miste dine fremskridt i nogen af ​​de spil, du spillede, da gemte filer ikke slettes ved afinstallation af Steam . Selve spillene er dog fjernet, så gør kun dette, hvis du er villig til at geninstallere dem igen.

1. Begynd med at afinstallere Steam . Åbn Tilføj^{(Open Add)} eller fjern programmer fra kontrolpanelet^{(Control Panel)} , eller søg blot efter det fra startmenuen^{(Start Menu)} .

1. Søg efter Steam på applisten for at finde klienten.

1. Hent^(Bring) de tre prikker frem, og vælg Afinstaller^(Uninstall) .

1. Du bliver bedt om at bekræfte dit valg igen.

1. Steam Uninstaller åbnes nu . Vælg Afinstaller –^{(Select Uninstall –)} igen – for endelig at fjerne Steam fra din computer.

Nu vil vi installere Steam igen.

1. Download den seneste version af installationsprogrammet fra Steam-hjemmesiden^{(Steam homepage)} .

1. Kør opsætningen for at installere Steam på din computer.

1. Når installationen er færdig, skal du åbne Steam . Lad den downloade alle opdateringer, den finder.

1. Log ind på din Steam- konto, og du er klar til at gå. Hvis alt gik godt, skulle du være i stand til at se Steam- butikken og dit bibliotek uden problemer.

Fix 2: Ryd download-cachen

Hvis du får denne fejl i et spil, du for nylig har downloadet, er download-cachen^{(Download Cache)} muligvis skyld. Blot^(Simply) at rydde cachen gør det ofte muligt for Steam at starte videospillet korrekt.

1. For at rydde download-cachen^{(Download Cache)} skal du først starte Steam- klienten.

1. I Steam-menuen skal du vælge Indstillinger.

1. Skift til fanen Downloads , og tryk på knappen RYD DOWNLOAD CACHE^{(CLEAR DOWNLOAD CACHE)} .

1. Du får en dialogboks, der advarer dig om resultaterne af denne handling. Vælg OK^{(Select OK)} for at fortsætte.

Log ind på Steam igen og se, om du kan spille problemspillet nu uden fejl.

Rettelse 3: Slet filerne libswscale-x.dll og SteamUI.dll^{(SteamUI.dll Files)}

En beskadiget SteamUI.dll -fil er den mest almindelige årsag til at få fejlen "Failed to load steamui.dll". Geninstallation af Steam er den mest oplagte løsning, selvom nogle mennesker kan undlade at skulle geninstallere hele deres spilbibliotek igen.

Et alternativ er blot at slette SteamUI.dll- og Libswscale-x.dll- filerne. Steam- klienten vil derefter automatisk downloade de manglende filer, næste gang du starter den.

1. For at slette de stødende filer skal du først navigere til Steams^(Steam) installationsmappe. Den nemmeste måde at gøre dette på er ved at finde stien fra skrivebordsgenvejen. Begynd med at højreklikke på Steam - genvejen og vælge Egenskaber.

1. I genvejsfanen^(Shortcut) (som er der, den skal åbnes) finder du en knap, der siger Åbn filplacering^{(Open File Location)} . Klik^(Click) på den.

1. Du vil nu blive ført direkte til mappen, der indeholder Steam . Find og slet filerne SteamUI.dll^{(SteamUI.dll)} og libswscale-x.dll. Bemærk, at x'et vil blive erstattet af et heltal, såsom libswscale-3.dll og libswscale-5.dll.

1. Nu skal du bare genstarte Steam , og klienten vil opdatere sig selv for at reparere de tabte data.

Dette vil løse problemet, hvis det var forårsaget af beskadigede versioner af DLL- filerne.

Fix 4: Slet betaversionen^{(Beta Version)} af ​​Steam

Som de fleste applikationer, der konstant opdaterer, har Steam en banebrydende betaversion med de nyeste funktioner (og masser af fejl).

Da du manuelt skal vælge Steam Client Beta , behøver du ikke bekymre dig om dette i de fleste tilfælde. Men hvis du bruger en betaversion af Steam -klienten, er det en god idé at fjerne den og prøve at køre Steam igen.

Du behøver ikke at afinstallere Steam for at fjerne Beta . Bare^(Just) slet beta-pakkefilen, og Steam tager sig af resten.

1. Først skal du navigere til Steam- mappen. Du kan finde trinene til at lokalisere i den forrige rettelse.

1. Åbn pakkemappen. Hvis du er på Steam Beta , vil du finde en fil med navnet lige øverst. Slet det.

1. Genstart^(Reboot) din computer og kør Steam . Det vil opdatere klienten og køre som normalt igen.

Dette vil rette fejlen "Kunnede ikke indlæse steamui.dll", hvis den stammer fra en fejl i betaversionen.

Fix 5: Scan for malware

Selvom det er ualmindeligt, er det muligt, at virus har inficeret dit Steam- bibliotek, hvilket ødelægger DLL- filerne og forhindrer Steam i at starte korrekt. I et sådant scenarie er din bedste udvej at scanne din computer for malware^{(scan your computer for malware)} .

Du kan bruge ethvert antivirusprogram til dette, selvom Windows Defender er et godt valg, der som standard findes på alle Windows -computere.

1. For at scanne din pc med Windows Defender skal du åbne Windows Securitys Virus- og trusselsbeskyttelsesfane. Du kan finde den ved at søge fra Startmenuen^{(Start Menu)} .

1. Du kan udføre en hurtig scanning^(Scan) , selvom vi anbefaler at vælge scanningsindstillinger^(Scan) lige under knappen i stedet.

1. Vælg Fuld scanning^{(Select Full Scan)} og tryk på knappen Scan nu.

En fuld scanning tager et stykke tid, så du skal muligvis vente et stykke tid. Men når scanningen er færdig, bør din pc være fri for malware. Genstart din computer og kør Steam igen.

Rettelse 6: Kontroller harddisken for fejl

Hvis ingen af ​​ovenstående rettelser har virket for dig, er det muligt, at du har at gøre med en defekt harddisk. Uopdagede dårlige sektorer kan ofte give mærkelige fejl, da operativsystemet ikke er i stand til at få adgang til de data, der er skrevet på dem.

Den bedste tilgang til at løse dette er at scanne drevet med System File Checker ( SFC ). SFC er et CMD-værktøj^{(SFC is a CMD utility)} , der går gennem beskyttede systemfiler og reparerer eventuelle beskadigede filer, der er opdaget.

1. For at scanne din harddisk med SFC skal du åbne kommandoprompten^{(Command Prompt)} . Du kan finde den ved at søge efter CMD i Start- menuen.

1. Indtast^(Enter) sfc /scannow for at scanne dit drev for logiske fejl.

1. SFC vil nu begynde at scanne disken og reparere eventuelle ødelagte systemfiler. Det tager ikke for lang tid, men lad processen fuldføre. Genstart din pc, når du er færdig.

Da SFC reparerer eventuelle beskadigede Windows -filer, vil eventuelle fejl på grund af operativsystemet nu blive rettet.

Hvad er den bedste måde at rette fejlen "Kunnede ikke indlæse^(Load) steamui.dll "^{(” Error)} ?

Det universelle middel til at geninstallere applikationen bør være dit første skridt, når du står over for en Steam- fejl. Hvis det ikke er en mulighed, kan du altid prøve at slette SteamUI.dll og lade Steam erstatte filen.

Bortset fra en beskadiget DLL -fil, kan problemet stamme fra tekniske fejl i Steam . Rydning af download-cachen^{(Download Cache)} og fjernelse af beta-pakken kan løse sådanne problemer og få det til at fungere igen.

Når ingen af ​​disse metoder virker, kan problemet ligge hos din pc selv. Brug Windows Defender til at scanne systemet for virus^{(Use Windows Defender to scan the system for viruses)} , og brug kommandolinjeværktøjer til at kontrollere harddisken for datakorruption. Hvis der findes problemer, skal du genstarte computeren og geninstallere Steam igen. Du burde være i stand til at spille dine spil normalt^{(play your games normally)} igen.

6 Best Ways to Fix the “Failed to Load steamui.dll” Error

The “Failed tо load steamui.dll” error has рlagued Steam since its advent and is, unfortunately, still present today. And it isn’t аlways Steam’s fault either – from corrupted files to missing Wіndows Updates, thеre is a range of еxternal factors that could be responsible.

The good news is that it’s usually rather easy to fix, unlike when Steam fails to launch without any error message. So here are the best ways to remove this irritating error and get back to playing your favorite video games again.

Fix 1: Reinstall Steam

Most of the time, the “Failed to load steamui.dll error” is caused by missing or corrupted files. And the easiest way to fix that problem is to uninstall and reinstall Steam.

You don’t have to worry about losing your progress in any of the games you were playing, since save files are not deleted upon uninstalling Steam. The games themselves are removed, though, so only do this if you’re willing to reinstall them again.

1. Begin by uninstalling Steam. Open Add or remove programs from the Control Panel, or just search for it from the Start Menu.

1. Search for Steam in the app list to find the client.

1. Bring up the three-dot and select Uninstall.

1. You will be asked to confirm your choice again.

1. The Steam Uninstaller will now open. Select Uninstall – again – to finally remove Steam from your computer.

Now we will install Steam again.

1. Download the latest version of the installer from the Steam homepage.

1. Run the setup to install Steam on your computer.

1. Once the installation is complete, open Steam. Let it download any updates it detects.

1. Sign in to your Steam account, and you’re ready to go. If everything went well, you should be able to view the Steam store and your library without any issues.

Fix 2: Clear the Download Cache

If you are getting this error in a game you recently downloaded, the Download Cache might be at fault. Simply clearing the cache often enables Steam to launch the video game properly.

1. To clear the Download Cache, first launch the Steam client.

1. In the Steam menu, select Settings.

1. Switch to the Downloads tab, and hit the CLEAR DOWNLOAD CACHE button.

1. You’ll get a dialog box warning you about the results of this action. Select OK to continue.

Log in to Steam again and see if you can play the problem game now without any errors.

Fix 3: Delete the libswscale-x.dll and SteamUI.dll Files

A corrupted SteamUI.dll file is the most common reason for getting the “Failed to load steamui.dll” error. Reinstalling Steam is the most obvious solution, though some people may balk at having to reinstall their whole library of games again.

An alternative is to just delete the SteamUI.dll and Libswscale-x.dll files. The Steam client will then automatically download the missing files the next time you launch it.

1. To delete the offending files, you must first navigate to Steam’s installation directory. The easiest way to do this is by finding the path from its desktop shortcut. Begin by right-clicking on the Steam shortcut and selecting Properties.

1. In the Shortcut tab (which is where it should open) you will find a button saying Open File Location. Click on it.

1. You will now be taken straight to the directory containing Steam. Find and delete the SteamUI.dll and libswscale-x.dll files. Note that the x will be replaced by an integer, like libswscale-3.dll and libswscale-5.dll.

1. Now just relaunch Steam and the client will update itself to repair the lost data.

This will fix the issue if it was being caused by corrupted versions of the DLL files.

Fix 4: Delete the Beta Version of Steam

Like most constantly updating applications, Steam has a cutting-edge beta version with the latest features (and plenty of bugs).

Since you have to manually opt for Steam Client Beta, you don’t have to worry about this in most cases. But if you are using a beta version of the Steam client, it’s a good idea to remove it and try running Steam again.

You don’t have to uninstall Steam to remove Beta. Just delete the beta package file and Steam will take care of the rest.

1. First, navigate to the Steam folder. You can find the steps to locating in the previous fix.

1. Open the package folder. If you’re on Steam Beta, you will find a file named that right at the top. Delete it.

1. Reboot your computer and run Steam. It will update the client and run as normal again.

This will fix the “Failed to load steamui.dll” error if it originated from a glitch in the beta version.

Fix 5: Scan for Malware

Though uncommon, it is possible for viruses to have infected your Steam directory, corrupting the DLL files and preventing Steam from launching properly. In such a scenario your best recourse is to scan your computer for malware.

You can use any antivirus application for this, though Windows Defender is a great choice present by default on every Windows computer.

1. To scan your PC with Windows Defender, open Windows Security’s Virus & threat protection tab. You can find it by searching from the Start Menu.

1. You can perform a Quick Scan, though we recommend selecting Scan options right below the button instead.

1. Select Full Scan and hit the Scan now button.

A full scan takes a while, so you may have to wait for a while. But once the scan is done, your PC should be free of malware. Restart your computer and run Steam again.

Fix 6: Check Hard Drive for Errors

If none of the fixes above have worked for you, it is possible that you are dealing with a malfunctioning hard drive. Undetected bad sectors can often throw weird errors, as the operating system is unable to access the data written on them.

The best approach for solving this is to scan the drive with the System File Checker (SFC). SFC is a CMD utility that goes through protected system files, repairing any corrupted files discovered.

1. To scan your hard disk with SFC, you need to open the Command Prompt. You can locate it by searching for CMD in the Start menu.

1. Enter sfc /scannow to scan your drive for logical errors.

1. SFC will now begin scanning the disk, repairing any broken system files found. It doesn’t take too long, but let the process complete. Restart your PC when you are done.

Since SFC repairs any corrupted Windows files, any errors due to the operating system will now be fixed.

What Is the Best Way to Fix the “Failed to Load steamui.dll” Error?

The universal remedy of reinstalling the application should be your first step whenever facing a Steam error. In case that is not an option, you can always try deleting the SteamUI.dll and allowing Steam to replace the file.

Apart from a corrupted DLL file, the problem can stem from technical glitches in Steam. Clearing the Download Cache and removing the beta package can fix such issues and get it working again.

When none of these methods work, the issue might lie with your PC itself. Use Windows Defender to scan the system for viruses, and use command-line tools to check the hard disk for data corruption. If any problems are found, restart the computer and reinstall Steam again. You should be able to play your games normally again.

Related posts

• Ret fejlen "Du skal have tilladelse til at udføre denne handling".

• 4 måder at slette eller fjerne en tjeneste i Windows

• De mest almindelige videoformater og codecs forklaret

• Tilslut en Windows XP-computer til en Windows 7/8/10-hjemmegruppe

• Vedhæft en VHD-fil i Windows XP

• 10 bedste offentlige DNS-servere i 2022: Sammenligning og gennemgang

• Sådan tager du et skærmbillede på Chromebook

• 12 bedste USB Wi-Fi-adaptere (2022)

• 6 måder at rette Netflix-fejlkode M7121-1331-P7 på

• Sådan rettes "Kunne ikke indlæse billede. Tryk for at prøve igen” Instagram-fejl

• Sådan rettes fejlen "Side-om-side-konfiguration er forkert" på Windows

• Sådan rettes fejlen "Trusted Platform Module has Defekt" i Windows

• Top 6 bedste fotoredigeringsapps til Windows 10?

• Sådan rettes "iTunes kunne ikke oprette forbindelse til denne iPhone. Værdien mangler” fejl

• Reparer manglende eller beskadigede skjulte filer og mapper i Windows

• 8 måder at løse "Du har ikke tilladelse til at gemme på denne placering"-fejl i Windows

• De 15 bedste måder at fremskynde Windows 10

• Ret "Du skal bruge en ny app for at åbne denne ms-windows-store"-fejl i Windows

• FIX: Xbox Controller bliver ved med at afbryde forbindelsen

• 7-Zip vs WinZip vs WinRAR (Bedste filkomprimeringsværktøj)