Når du får adgang til Windows Security , den indbyggede Anti-Virus/Security , hvis du modtager en fejlmeddelelse, der siger— Kan ikke åbne denne app, Din it-administrator har deaktiveret Windows Security. Kontakt din IT Helpdesk^{( Cannot Open this app, Your IT administrator has disabled Windows Security. Contact your IT Help desk)} ; så kan dette indlæg hjælpe dig med at finde en løsning på dette. Det er et af de mærkelige problemer, jeg stod over for for nylig, og det skete på begge mine computere, og jeg var i stand til at løse det ved at ændre nogle indstillinger. Jeg søgte efter det på internettet^(Internet) og fandt ud af, at der overhovedet ikke var nogen omtale af denne særlige fejlmeddelelse. Jeg prøvede flere metoder, men det var det, der til sidst hjalp mig.

Din it-administrator har deaktiveret Windows-sikkerhed^{(Windows Security)}

Fejlen vises, så snart du starter Windows Security , og den viser muligvis Windows Security -appen et øjeblik, den vil øjeblikkeligt blive erstattet af dette lille vindue, der beder dig kontakte din IT-afdeling. Det mærkelige var, at det dukkede op på min Windows 10-computer derhjemme, og jeg er den eneste administrator på den konto. Den anden computer tilhører min søn; han har en standardkonto på computeren. Hvis du står over for dette problem, skal du logge ind på din administratorkonto og bruge en af ​​disse metoder til at løse dette.

1. Gruppepolitik metode
2. Registreringsmetode

Da Windows 10 Home-brugere ikke har adgang til gruppepolitik^{( don’t have access to Group Policy)} , kan de bruge registreringsmetoden^(Registry) . Sørg dog for at oprette et systemgendannelsespunkt.

1] Gruppepolitikmetode

Åbn Group Policy Editor ved at skrive gpedit.msc i Kør^(Run) - prompten ( Win + R ). Naviger derefter til:

Computer Configuration > Administrative Templates > Windows Components > Windows Security.

Her har du flere politikker for Windows-sikkerhed^{(Windows Security)} , som du skal ændre for at aktivere tilbageadgang:

• Kontobeskyttelse
• App- og browserbeskyttelse
• Enhedens ydeevne og sundhed
• Enhedssikkerhed
• Familie muligheder
• Firewall og netværksbeskyttelse
• Meddelelser
• Systray
• Virus- og trusselsbeskyttelse

Åbn hver af disse mapper, og dobbeltklik for at åbne politikkerne i den. Skift det fra Ikke konfigureret^{(Not Configured)} til Deaktiveret^(Disabled) .

Jeg vil anbefale ikke at ændre noget, som er under Enterprise Customization -politikken, medmindre det er relevant for din computer.

Her er et skærmbillede, da jeg aktiverede et par indstillinger. Når du gør det, vises det automatisk i Windows Security .

Den første indstillingsændring efter denne metode giver adgang til Windows Security -appen.

Sammenlign billedet ovenfor med billedet nedenfor. Så snart jeg valgte deaktiveret for Enhedsydelse^(Device) og sundhedsområdepolitik, dukkede det op med det samme i Windows Security -appen.

 

Efter at have aktiveret dem alle, var jeg i stand til at få adgang til alle indstillinger af Windows Security uden problemer. Jeg gætter på, at noget ændrede alle disse indstillinger og blokerede min adgang til Windows Security -appen. Det var ikke er deaktiveret, fordi det var i stand til at blokere enhver virus eller uønsket program fra internettet, og jeg var i stand til at se det i Task Manager . Jeg var ikke i stand til at få adgang til det, selv med administratorens tilladelse.

Relateret læsning^{(Related read)} : Din it-administrator har begrænset adgang til nogle områder af denne app^{(Your IT Administrator has limited access to some areas of this app)} .

2] Registermetode

Åbn Registreringseditor^{(Registry Editor)} ved at skrive Regedit i Kør^(Run) -prompten ( Win +R ) efterfulgt af at trykke på enter -tasten^(Key) . Naviger derefter til:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center

Indstil følgende eller opret respektive DWORD som følger:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Account protection

“UIlockdown”=dword:00000000

For at oprette en DWORD skal du gå ind i Kontobeskyttelsesnøgle^{(Account protection)} og derefter højreklikke på højre side. Opret en DWORD med navnet UILockdown , og indstil dens værdi til 0.

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\App and Browser protection

“DisallowExploitProtectionOverride”=dword:00000000
“UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Device performance and health

“UIlockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Device security

“DisableClearTpmButton”=dword:00000000
“
DisableTpmFirmwareUpdateWarning”=dword:00000000
“HideSecureBoot”=dword:00000000 “HideTPMTroubleshooting”=dword:000000000
“dword:000000000down”

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Family options

“UIlockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Firewall and network protection

UILockdown"=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Notifications

“DisableEnhancedNotifications”=dword:00000000
“DisableNotifications”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Systray

"HideSystray"=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Virus and threat protection

“UILockdown”=dword:00000000
“ HideRansomwareRecovery ”=dword:00000000

Hvis computeren begrænser adgangen til enten gruppepolitikken eller registreringseditoren, skal du oprette en administratorkonto på din computer og bruge den til at ændre indstillingerne.

Jeg håber, at indlægget hjælper dig med at få adgang til Windows Security -appen.

Relateret læsning: ^{(Related Read:)} Sådan nulstiller du Windows-sikkerhed til standardindstillinger.

Your IT administrator has disabled Windows Security

When accessing Windows Security, the built-in Anti-Virus/Security solυtion, if you receive an error saying— Cannot Open this app, Your IT administrator has disabled Windows Security. Contact your IT Help desk; then, this post can help you find a solution for this. It’s one of the odd issues I faced recently, and it happened on both of my computers, and I was able to resolve it by changing some settings. I searched for it on the Internet and found that there was absolutely no mention of this particular error message at all. I tried several methods, but this is what finally helped me.

Your IT administrator has disabled Windows Security

The error appears as soon as you launch Windows Security, and it may show the Windows Security app for a moment, it will instantly be replaced by this small window asking you to contact your IT hed. The strange part was that it appeared on my Windows 10 computer at home, and I am the only admin on that account. The other computer belongs to my son; he has a standard account on the computer.  If you face this issue, log into your admin account and use one of these methods to fix this.

1. Group Policy Method
2. Registry Method

Since Windows 10 Home users don’t have access to Group Policy, they can use the Registry method. However, make sure to create a system restore point.

1] Group Policy Method

Open Group Policy Editor by typing gpedit.msc in the Run prompt (Win + R). Then navigate to:

Computer Configuration > Administrative Templates > Windows Components > Windows Security.

Here you have multiple policies for Windows Security, which you will need to change to enable back access:

• Account protection
• App and browser protection
• Device performance and health
• Device Security
• Family Options
• Firewall and network protection
• Notifications
• Systray
• Virus and Threat Protection

Open each of these folders, and double click to open the policies inside it. Change it from Not Configured to Disabled.

I will recommend not to change anything which is under Enterprise Customization policy unless it is applicable for your computer.

Here is a screenshot when I enabled a few settings. When you do so, it will automatically appear in Windows Security.

The first setting change following this method will enable access to the Windows Security app.

Compare the image above with the one below. As soon as I selected disabled for Device performance and health area policy, it appeared right away in the Windows Security app.

 

After enabling all of them, I was able to access all settings of Windows Security without a problem. I am guessing that something changed all these settings and blocked my access to Windows Security app. It was not is disabled because it was able to block any virus or unwanted program from the internet, and I was able to see it in the Task Manager. I wasn’t able to access it even with the admin permission.

Related read: Your IT Administrator has limited access to some areas of this app.

2] Registry Method

Open Registry Editor by typing Regedit in the Run prompt (Win +R) followed by pressing the enter Key. Then navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center

Set the following or create respective DWORD as follows:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Account protection

“UILockdown”=dword:00000000

To create a DWORD, go into Account protection key, and then right-click on the right side. Create a DWORD with name UILockdown, and set its value as 0.

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\App and Browser protection

“DisallowExploitProtectionOverride”=dword:00000000
“UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Device performance and health

“UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Device security

“DisableClearTpmButton”=dword:00000000
“DisableTpmFirmwareUpdateWarning”=dword:00000000
“HideSecureBoot”=dword:00000000
“HideTPMTroubleshooting”=dword:00000000
“UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Family options

“UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Firewall and network protection

UILockdown”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Notifications

“DisableEnhancedNotifications”=dword:00000000
“DisableNotifications”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Systray

“HideSystray”=dword:00000000

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Defender Security Center\Virus and threat protection

“UILockdown”=dword:00000000
“HideRansomwareRecovery”=dword:00000000

If the computer restricts from accessing either the group policy or the registry editor, create an admin account on your computer, and use that to change the settings.

I hope the post helps you access the Windows Security app.

Related Read: How to reset Windows Security to default settings.

Related posts

• Sådan tilføjer du fil- eller procesekskludering til Windows-sikkerhed

• Skift Windows-sikkerhedsindstillinger øjeblikkeligt med ConfigureDefender

• Forhindre brugere i at ændre Exploit Protection i Windows Security

• Windows Security siger Ingen sikkerhedsudbydere i Windows 11/10

• Sikkerhed overblik-siden i Windows Sikkerhed er tom i Windows 11/10

• Hvad er Control Flow Guard i Windows 10 - Sådan slår du den til eller fra

• Sådan redigerer du listen over tilladte apps i Windows Defender Firewall (og blokerer andre)

• Beskyt din pc med Windows Security sammen med en tredjeparts antivirus

• Nye funktioner kommer til Windows Defender i Windows 10 Creators Update

• Sådan opdaterer du Windows Defender manuelt i Windows 10

• Hvad er firewall og netværksbeskyttelse i Windows 10, og hvordan skjules dette afsnit

• Sådan tillader du manuelt en blokeret fil eller app i Windows Security

• Udfør Windows Defender Offline Scan ved opstart i Windows 11/10

• Fejl 0x800106ba, Windows Defender-applikationen kunne ikke initialiseres

• Hvad er enhedssikkerhed i Windows 11/0, og hvordan skjuler man dette område?

• Sådan skjules eller viser du Windows-sikkerhedsikonet på proceslinjen i Windows 10

• Hvor er Windows Defender Offline scanningslogfiler gemt?

• 10 måder at starte Windows Security på i Windows 10

• Opdater Windows Defender, når Automatiske opdateringer er deaktiveret

• Sådan deaktiveres Windows-sikkerhedsmeddelelser i Windows 10