Fix Host Process for Windows Services er holdt op med at virke: ^{(Fix Host Process for Windows Services has stopped working: )} De fleste af brugerne står over for dette problem, hvor en fejlmeddelelse dukker op, der siger " Host Process for Windows Services er holdt op med at virke og blev lukket." Da fejlmeddelelsen ikke har nogen information knyttet til sig, er der ingen særlig årsag til, hvorfor denne fejl er forårsaget. For at få flere oplysninger om denne fejl skal du åbne Vis pålidelighedshistorik^{(View Reliability History)} og kontrollere årsagen til dette problem. Hvis du ikke finder de rigtige oplysninger, skal du åbne Even Viewer for at komme til hovedårsagen til denne fejlmeddelelse.

Efter at have brugt en masse tid på at undersøge denne fejl, ser det ud til, at den er forårsaget på grund af tredjepartsprogram, der er i konflikt med Windows , en anden mulig forklaring ville være hukommelseskorruption, eller nogle vigtige Windows - tjenester kan være beskadiget. De fleste af brugerne fik denne fejlmeddelelse efter Windows -opdatering, som synes at være på grund af BITS ( Background Intelligent Transfer Service ) filer kan være beskadiget. Under alle omstændigheder er vi nødt til at rette fejlmeddelelsen, så uden at spilde nogen tid, lad os se, hvordan man rent faktisk Fix Host Process for Windows Services er holdt op med at fungere fejl med nedenstående fejlfindingstrin.

Fix Host Process for Windows Services er holdt op med at virke

Sørg for at  oprette et gendannelsespunkt,^{(create a restore point)}  hvis noget går galt.

Metode 1: Åbn Event Viewer eller Reliability History^{(Method 1: Open Event Viewer or Reliability History)}

1. Tryk på Windows-tasten + R, skriv derefter eventvwr og tryk på Enter for at åbne Event Viewer.

2. Dobbeltklik nu fra menuen til venstre på Windows Logs og tjek derefter Application and System logs.

3.Se efter hændelser markeret med rødt X^{(red X)} ved siden af ​​dem, og sørg for at kontrollere fejldetaljerne, som inkluderer fejlmeddelelsen " Værtsprocessen for Windows er holdt op med at fungere. ^{(Host process for Windows has stopped working.)}“

4. Når du har nulstillet problemet, kan vi begynde at fejlfinde problemet og løse problemet.

Hvis du ikke fandt nogen værdifuld information om fejlen, kan du åbne pålidelighedshistorikken^{(Reliability history)} for at få et bedre indblik i fejlen.

1. Indtast Reliability i Windows-søgningen^{(Windows Search)} , og klik på View Reliability History i søgeresultatet.

2.Søg efter hændelsen med en fejlmeddelelse "Værtsprocessen for Windows er holdt op med at fungere. ^{(Host process for Windows has stopped working.)}“

3. Noter den involverede proces, og følg nedenstående fejlfindingstrin for at løse problemet.

4.Hvis ovenstående tjenester er relateret til 3. part, skal du sørge for at afinstallere tjenesten fra Kontrolpanel^{(Control Panel)} og se, om du er i stand til at løse problemet.

Metode 2: Udfør en ren opstart^{(Method 2: Perform a Clean Boot)}

Nogle gange kan tredjepartssoftware være i konflikt med systemet,^(System) og systemet^(System) lukker derfor muligvis ikke helt ned. For at Fix Host Process for Windows Services er holdt op med at fungere fejl^{(Fix Host Process for Windows Services has stopped working error)} , skal du udføre en ren opstart^{(perform a clean boot)} på din pc og diagnosticere problemet trin for trin.

Metode 3: Kør Systemgendannelse^{(Method 3: Run System Restore)}

1. Tryk på Windows-tasten + R og skriv" sysdm.cpl " og tryk derefter på Enter.

2. Vælg fanen Systembeskyttelse^{(System Protection)} , og vælg Systemgendannelse.^{( System Restore.)}

3. Klik på Næste og vælg det ønskede systemgendannelsespunkt^{(System Restore point)} .

4. Følg instruktionerne på skærmen for at fuldføre systemgendannelse.

5. Efter genstart er du muligvis i stand til at Fix Host Process for Windows Services er holdt op med at fungere fejl.^{(Fix Host Process for Windows Services has stopped working error.)}

Metode 4: Kør DISM Tool^{(Method 4: Run DISM Tool)}

Kør ikke SFC , da det vil erstatte Microsoft Opencl.dll -filen med Nvidia , som ser ud til at forårsage dette problem. Hvis du har brug for at kontrollere systemets integritet, skal du køre DISM Checkhealth-kommandoen.

1. Tryk på Windows Key + X og vælg derefter Kommandoprompt (Admin).^{(Command Prompt (Admin).)}

2. Prøv disse kommandoer sin sekvens:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3.Hvis ovenstående kommando ikke virker, så prøv på nedenstående:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Bemærk: ^(Note:) Udskift^(Replace) C:RepairSourceWindows med placeringen af ​​din reparationskilde ( Windows Installation eller Recovery Disc ).

4. Kør ikke SFC /scannow for at verificere integriteten af ​​systemkørsel DISM-^(DISM) kommando:

Dism /Online /Cleanup-Image /CheckHealth

5. Genstart din pc for at gemme ændringer.

Metode 5: Kør CCleaner og Malwarebytes^{(Method 5: Run CCleaner and Malwarebytes)}

1.Download og installer  CCleaner  &  Malwarebytes.

2. Kør Malwarebytes^{(Run Malwarebytes)}  og lad det scanne dit system for skadelige filer.

3. Hvis der findes malware, vil den automatisk fjerne dem.

4. Kør nu  CCleaner  , og i afsnittet "Cleaner", under fanen Windows , foreslår vi, at du tjekker følgende valg, der skal renses:

5.Når du har sikret dig, at de korrekte punkter er kontrolleret, skal du blot klikke på  Kør^{(Run Cleaner,)} oprydning  og lade CCleaner køre sin gang.

6. For at rense dit system yderligere skal du vælge fanen Registrering^(Registry) og sikre, at følgende er markeret:

7. Vælg Scan for Issue , og lad CCleaner scanne, og klik derefter på  Fix Selected Issues.

8.Når CCleaner spørger " Vil du have sikkerhedskopierede ændringer til registreringsdatabasen? ^{(Do you want backup changes to the registry?)}” vælg Ja.

9. Når din sikkerhedskopiering er fuldført, skal du vælge Fix All Selected Issues .

10. Genstart din pc for at gemme ændringer.

Metode 6: Reparer beskadigede BITS-filer^{(Method 6: Repair Corrupted BITS files)}

1. Tryk på Windows Key + R , skriv derefter følgende og tryk på Enter:

\Programdata\Microsoft\network\downloader

2. Det vil bede om tilladelse, så klik på Fortsæt.^(Continue.)

3.I mappen Downloader skal du slette enhver fil, der begynder med Qmgr^{(any file that begins with Qmgr)} , for eksempel Qmgr0.dat , Qmgr1.dat osv.

4. Efter succesfuld i stand til at slette ovenstående filer straks køre Windows Update.

5. Hvis du ikke er i stand til at slette ovenstående filer, så følg Microsoft KB- artiklen om, hvordan du reparerer de korrupte BITS-filer.^{(how to repair the corrupt BITS files.)}

Metode 7: Kør Memtest86^{(Method 7: Run Memtest86)}

Bemærk:^(Note:) Før du starter, skal du sørge for, at du har adgang til en anden computer, da du skal downloade og brænde softwaren til disken eller USB -flashdrevet. Det er bedst at lade computeren stå natten over, når du kører memtest, da det sikkert tager lidt tid.

1. Tilslut et USB -flashdrev til dit system.

2.Download og installer Windows Memtest86  Auto-installer for USB Key .

3. Højreklik på billedfilen, som du lige har downloadet, og vælg " Udpak her^{(Extract here)} " mulighed.

4. Når den er pakket ud, skal du åbne mappen og køre Memtest86+ USB Installer .

5. Vælg dit tilsluttede USB -drev for at brænde MemTest86- softwaren (Dette vil formatere dit USB -drev).

6. Når ovenstående proces er afsluttet, skal du indsætte USB'en^(USB) til pc'en, hvor Host Process for Windows Services er holdt op med at fungere fejlen^{(Host Process for Windows Services has stopped working error)} er til stede.

7. Genstart din pc, og sørg for, at boot fra USB -flashdrevet er valgt.

8.Memtest86 vil begynde at teste for hukommelseskorruption i dit system.

9.Hvis du har bestået hele testen, kan du være sikker på, at din hukommelse fungerer korrekt.

10.Hvis nogle af trinene var forgæves, så vil Memtest86 finde hukommelseskorruption, hvilket betyder, at ovenstående fejl ^{(the above error is )} skyldes dårlig/korrupt hukommelse.

11.For at  Fix Host Process for Windows Services er holdt op med at fungere fejl^{( Fix Host Process for Windows Services has stopped working error)} , skal du udskifte din RAM , hvis der findes dårlige hukommelsessektorer.

Anbefalet til dig:^{(Recommended for you:)}

• Ret sorte firkanter bag mappeikoner^{(Fix Black Squares Behind Folder Icons)}
• Fix Task Scheduler service er ikke tilgængelig fejl^{(Fix Task Scheduler service is not available error)}
• Sådan rettes Windows 10 vil ikke lukke helt ned^{(How to Fix Windows 10 will not shut down completely)}
• Ret Windows-tastaturgenveje, der ikke virker^{(Fix Windows Keyboard Shortcuts Not Working)}

Det er det, du har med succes Fix Host Process for Windows Services er holdt op med at fungere fejl,^{( Fix Host Process for Windows Services has stopped working error)} men hvis du stadig har spørgsmål vedrørende denne vejledning, er du velkommen til at stille dem i kommentarens sektion.

Fix Host Process for Windows Services has stopped working

Fix Host Process for Windows Services has stopped working: Most of the users are facing this issue where an error message pops up saying “Host Process for Windows Services has stopped working and was closed.” As the error message doesn’t have any information attached to it, so there is no particular cause as to why this error is caused. In order to get more information about this error, you need to open View Reliability History and check the cause of this issue. If you don’t find the proper information then you need to open Even Viewer to get to the root cause of this error message.

After spending a lot of time, researching about this error it seems like it caused because of 3rd party program conflicting with Windows, another possible explanation would be memory corruption or some important Windows services might be corrupted. Most of the users were getting this error message after Windows update which seems to be because of BITS (Background Intelligent Transfer Service) files might be corrupted. In any case, we need to fix the error message, so without wasting any time let’s see how to actually Fix Host Process for Windows Services has stopped working error with the below-listed troubleshooting steps.

Fix Host Process for Windows Services has stopped working

Make sure to create a restore point just in case something goes wrong.

Method 1: Open Event Viewer or Reliability History

1.Press Windows Key + R then type eventvwr and hit Enter to open Event Viewer.

2.Now from the left-hand menu double click Windows Logs then check Application and System logs.

3.Look for the events marked with red X next to them and make sure to check the error details which includes error message “Host process for Windows has stopped working.“

4.Once you have zeroed into the issue we can start troubleshooting the problem and fix the issue.

If you didn’t find any valuable information about the error, you could open Reliability history to get a better insight about the error.

1.Type Reliability in the Windows Search and click on View Reliability History in the search result.

2.Search for the event with an error message “Host process for Windows has stopped working.“

3.Note down the process involved and follow the below-listed troubleshooting steps to fix the issue.

4.If the above services are related to the 3rd party then make sure to uninstall the service from Control Panel and see if you’re able to fix the issue.

Method 2: Perform a Clean Boot

Sometimes 3rd party software can conflict with System and therefore the System might not shut down completely. In order Fix Host Process for Windows Services has stopped working error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 3: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow on screen instruction to complete system restore.

5.After reboot, you may be able to Fix Host Process for Windows Services has stopped working error.

Method 4: Run DISM Tool

Don’t run SFC as it will replace Microsoft Opencl.dll file with Nvidia which seems to be causing this issue. If you need to check the integrity of the system run DISM Checkhealth command.

1.Press Windows Key + X then select Command Prompt (Admin).

2.Try these command sin sequence:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3.If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

4.Don’t run SFC /scannow in order to verify the integrity of system run DISM command:

Dism /Online /Cleanup-Image /CheckHealth

5.Reboot your PC to save changes.

Method 5: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes.

Method 6: Repair Corrupted BITS files

1.Press Windows Key + R then type the following and hit Enter:

\Programdata\Microsoft\network\downloader

2.It will ask for permission so click Continue.

3.In the Downloader folder, delete any file that begins with Qmgr, for example, Qmgr0.dat, Qmgr1.dat etc.

4.After successfully able to delete the above files immediately run Windows update.

5.If you are not able to delete the above files then follow the Microsoft KB article on how to repair the corrupt BITS files.

Method 7: Run Memtest86

Note: Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running memtest as it sure likely to takes some time.

1.Connect a USB flash drive to your system.

2.Download and install Windows Memtest86 Auto-installer for USB Key.

3.Right-click on the image file which you just downloaded and select “Extract here” option.

4.Once extracted, open the folder and run the Memtest86+ USB Installer.

5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).

6.Once the above process is finished, insert the USB to the PC in which Host Process for Windows Services has stopped working error is present.

7.Restart your PC and make sure that boot from the USB flash drive is selected.

8.Memtest86 will begin testing for memory corruption in your system.

9.If you have passed all the test then you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means the above error is because of bad/corrupt memory.

11.In order to Fix Host Process for Windows Services has stopped working error, you will need to replace your RAM if bad memory sectors are found.

Recommended for you:

• Fix Black Squares Behind Folder Icons
• Fix Task Scheduler service is not available error
• How to Fix Windows 10 will not shut down completely
• Fix Windows Keyboard Shortcuts Not Working

That’s it you have successfully Fix Host Process for Windows Services has stopped working error but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Ret værtsproces for indstilling af synkronisering

• Reparer DISM Host Service Process Høj CPU-brug

• Ret høj CPU-brug af tjenestevært: Lokalt system

• Reparer tjenestevært: Lokalt system (svchost.exe) Højt CPU- og diskforbrug

• Fix Task Host Window forhindrer nedlukning i Windows 10

• Fix Windows kunne ikke fuldføre formateringen

• Løs problemer med driveren til Universal Serial Bus (USB)-controller

• Fix Kan ikke installere netværksadapter fejlkode 28

• Fix Desktop refererer til en placering, der ikke er tilgængelig

• Ret Alt+Tab virker ikke i Windows 10

• Reparer Windows Computer genstarter uden varsel

• Sådan rettes Firefox, der ikke afspiller videoer (2022)

• 7 måder at rette kritisk proces døde på i Windows 10

• Sådan rettes applikationsfejl 0xc0000005

• Sådan repareres pc vil ikke POST

• Fix Windows kan ikke kommunikere med enheden eller ressourcen

• Fix Computer starter ikke, før den genstartes flere gange

• Ret sort skrivebordsbaggrund i Windows 10

• Fix Kan ikke åbne lokal disk (C:)

• Ret Windows Update-fejlkode 0x80072efe