Generelt lader Windows 11/10 dig kun oprette én fjernskrivebordsforbindelse^{(Remote Desktop Connection)} på én computer. Med nogle få justeringer kan du dog etablere mere end én fjernskrivebordsforbindelse^{(Remote Desktop Connections)} på et Windows -system. Dette kan være nyttigt, hvis du ser meddelelsen Du er blevet afbrudt, fordi der blev oprettet en anden forbindelse til fjerncomputeren^{(You have been disconnected because another connection was made to the remote computer)} .

Hvor mange forbindelser kan du oprette via RDP ?

Under normale forhold begrænser Windows 11/10 antallet af brugere, der kan oprette forbindelse via Fjernskrivebordsforbindelse^{(Remote Desktop Connection)} . Som standard er dette tal 1 . Hvis en anden bruger forsøger at oprette forbindelse, når en fjernskrivebordsforbindelse^{(Remote Desktop Connection)} allerede er etableret, får den nye bruger en fejlmeddelelse. Fejlmeddelelsen siger-

Another user is signed in. If you continue, they’ll be disconnected. Do you want to sign in any way?

For at undgå dette kan du øge antallet af brugere, der kan logge på Remote Desktop -tjenesten samtidigt.

Læs^(Read) : Kan du aktivere samtidige sessioner i Windows 11/10 ?

Forøg antallet af fjernskrivebordsforbindelser^{(Remote Desktop Connections)}

Har du brug for at tillade flere fjernskrivebordsforbindelser^{(Remote Desktop Connections)} på serveren^(Server) ? Du kan tillade mere end to RDP-sessioner i Windows 11/10 ved at gøre brug af en Gropu Policy- indstilling.

Her er trinene, ved hjælp af hvilke du kan øge eller begrænse antallet af fjernskrivebordsforbindelser^{(Remote Desktop Connections)} i Windows 11/10 .

1] Tryk på Startmenu og begynd at skrive gpedit.msc .

2] Åbn nu denne konsol. Det åbner vinduet Local Group Policy Editor .

3] Følg nu de næste trin:

Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections

Du vil se følgende liste i det åbne højre sidepanel.

4] Herefter skal du dobbeltklikke på muligheden ' Begræns antal forbindelser^{(Limit number of connections)} '. Følgende vindue åbnes. Som standard vises dens tilstand som ' Ikke konfigureret^{(Not Configured)} '.

5] Vælg alternativknappen Aktiveret for at øge eller begrænse antallet af ^{(Enabled )}fjernskrivebordsforbindelser^{(Remote Desktop Connections)} . Dette aktiverer tællermenuen for 'RD Maksimale forbindelser tilladt' i sektionen Indstillinger^(Options) .

6] Øg eller sænk nu det maksimale antal forbindelser, der er tilladt i tælleren ved at bruge pil op eller ned, i henhold til kravet.

7] Når nummeret er valgt, skal du klikke på OK for at anvende ændringerne.

Du vil se følgende oplysninger i højre sidepanel af Hjælp^(Help) .

This setting specifies whether Remote Desktop Services limits the number of simultaneous connections to the server.

You can use this setting to restrict the number of Remote Desktop Services sessions that can be active on a server. If this number is exceeded, additional users who try to connect receive an error message telling them that the server is busy and to try again later. Restricting the number of sessions improves performance because fewer sessions are demanding system resources. By default, RD Session Host servers allow an unlimited number of Remote Desktop Services sessions, and Remote Desktop for Administration allows two Remote Desktop Services sessions.

To use this setting, enter the number of connections you want to specify as the maximum for the server. To specify an unlimited number of connections, type 999999.

If the status is set to Enabled, the maximum number of connections is limited to the specified number consistent with the version of Windows and the mode of Remote Desktop Services running on the server.

If the status is set to Disabled or Not Configured, limits to the number of connections are not enforced at the Group Policy level.

This setting is designed to be used on RD Session Host servers (that is, on servers running Windows with Remote Desktop Session Host role service installed).

Efter dette vil du se, at tilstanden 'Begrænset antal forbindelse' er ændret til 'Aktiveret'.

For at gendanne indstillingerne skal du gennemgå de samme trin.

Genstart din computer for at ændringerne træder i kraft.

Relateret: ^(Related:) Remote Credential Guard beskytter Remote Desktop-legitimationsoplysninger^{(Remote Credential Guard protects Remote Desktop credentials)} .

Increase the number of Remote Desktop Connections in Windows 11/10

In general, Windows 11/10 lets you establish only one Remote Desktop Connection on one computer. However, with a few tweaks, you can establish more than one Remote Desktop Connections on a Windows system. This can be useful if you see a You have been disconnected because another connection was made to the remote computer message.

How many connections can you establish via RDP?

In normal conditions, Windows 11/10 restricts the number of users who can connect via Remote Desktop Connection. By default, this number is 1. If another user tries to connect when one Remote Desktop Connection is already established, then the new user gets an error message. The error message says-

Another user is signed in. If you continue, they’ll be disconnected. Do you want to sign in any way?

To avoid this, you can increase the number of users who can log into Remote Desktop service simultaneously.

Read: Can you enable Concurrent Sessions in Windows 11/10?

Increase the number of Remote Desktop Connections

Need to allow multiple Remote Desktop Connections in Server? You can allow more than two RDP sessions in Windows 11/10 by making use of a Gropu Policy setting.

Here are the steps with the help of which you can increase or limit the number of Remote Desktop Connections in Windows 11/10.

1] Press Start Menu and start typing gpedit.msc.

2] Now, open this console. It opens the Local Group Policy Editor window.

3] Now, follow the next steps:

Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections

You will see the following list in the open right-hand side panel.

4] After this, double-click on the ‘Limit number of connections’ option. The following window opens. By default, its state is displayed as ‘Not Configured’.

5] Select the Enabled radio button to increase or limit the number of Remote Desktop Connections. This enables the counter menu of ‘RD Maximum Connections allowed’ in the Options section.

6] Now, increase or decrease the maximum number of connections allowed in the counter using the up or down arrow, as per the requirement.

7] Once the number is selected, click OK to apply the changes.

You will see the following information on the right-hand side panel of Help.

This setting specifies whether Remote Desktop Services limits the number of simultaneous connections to the server.

You can use this setting to restrict the number of Remote Desktop Services sessions that can be active on a server. If this number is exceeded, additional users who try to connect receive an error message telling them that the server is busy and to try again later. Restricting the number of sessions improves performance because fewer sessions are demanding system resources. By default, RD Session Host servers allow an unlimited number of Remote Desktop Services sessions, and Remote Desktop for Administration allows two Remote Desktop Services sessions.

To use this setting, enter the number of connections you want to specify as the maximum for the server. To specify an unlimited number of connections, type 999999.

If the status is set to Enabled, the maximum number of connections is limited to the specified number consistent with the version of Windows and the mode of Remote Desktop Services running on the server.

If the status is set to Disabled or Not Configured, limits to the number of connections are not enforced at the Group Policy level.

This setting is designed to be used on RD Session Host servers (that is, on servers running Windows with Remote Desktop Session Host role service installed).

After this, you will see the state of ‘Limit number of connection’ is changed to ‘Enabled’.

To restore the settings, go through the same steps.

Restart your computer for the changes to take effect.

Related: Remote Credential Guard protects Remote Desktop credentials.

Related posts

• Opret genvej til fjernskrivebordsforbindelse i Windows 11/10

• Fjernskrivebord kan ikke oprette forbindelse til fjerncomputeren på Windows 11/10

• Fix Remote Desktop kan ikke finde computerfejlen i Windows 11/10

• Remote Desktop Services forårsager høj CPU i Windows 11/10

• Sådan bruger du Remote Desktop (RDP) i Windows 11/10 Home

• Bedste gratis fjernskrivebordssoftware til Windows 10

• Desktop og proceslinje bliver ved med at opdatere konstant i Windows 11/10

• Giv eller tag teknisk support ved hjælp af Quick Assist-appen i Windows 11/10

• Desktop eller Stifinder opdateres ikke automatisk i Windows 11/10

• Aktiver Fjernskrivebord på Windows 10 under 2 minutter

• Fix Desktop bliver lyserød eller lilla i Windows 11/10

• Kommandolinjeparametre for fjernskrivebordsforbindelser

• Sådan kommer du til skrivebordet på Windows 11/10 pc

• Skift lytteporten til Remote Desktop

• Sådan ændres skrivebordsikonafstand i Windows 11/10

• Gruppepolitik for skrivebordsbaggrund gælder ikke i Windows 11/10

• Fjern historieposter fra fjernskrivebordsforbindelse i Windows 11

• Kan ikke højreklikke på skrivebordet i Windows 11/10

• Sådan opretter du et skrivebordsbaggrundsdiasshow i Windows 11/10

• Kan ikke kopiere indsæt i fjernskrivebordssession i Windows 10