Ret installationen mislykkedes i den første opstartsfase Fejl: ^{(Fix The Installation Failed In The First Boot Phase Error: )} Hvis du opgraderer til Windows 10 eller opgraderer til en ny større opdatering fra Microsoft , er chancerne for, at installationen mislykkes, og du vil stå tilbage med en fejlmeddelelse, der siger "Vi kunne" ™t installer Windows 10 .†Hvis du ser godt efter, vil du finde nogle yderligere oplysninger nederst, som ville være en fejlkode 0xC1900101 – 0x30018 eller 0x80070004 – 0x3000D afhængigt af fejltypen. Så disse er følgende fejl, som du kan modtage:

0x80070004 – 0x3000D
Installationen mislykkedes i FIRST_BOOT -fasen med en fejl under MIGRATE_DATE- operationen.

0xC1900101 – 0x30018
Installationen mislykkedes i FIRST_BOOT -fasen med fejlen under SYSPREP- drift.

0xC1900101-0x30017
Installationen mislykkedes i FIRST_BOOT -fasen med en fejl under BOOT - drift.

Nu er alle ovenstående fejl enten forårsaget på grund af forkert konfiguration af registreringsdatabasen eller på grund af enhedsdriverkonflikt. Nogle gange kan tredjepartssoftware også forårsage ovenstående fejl, så vi er nødt til at fejlfinde problemet og rette årsagen for at løse denne fejl. Så uden at spilde nogen tid, lad os se, hvordan man rent faktisk fikser installationen^{(Installation)} mislykkedes i den første opstartsfasefejl^{(First Boot Phase Error)} ved hjælp af nedenstående fejlfindingsvejledning.

Ret installationen^{(Installation)} mislykkedes i den første opstartsfasefejl^{(First Boot Phase Error)}

Sørg for at  oprette et gendannelsespunkt,^{(create a restore point)} hvis noget går galt.

Bemærk: ^(Note:) Sørg^(Make) for at frakoble eventuelle eksterne enheder, der er tilsluttet pc'en.

Metode 1: Deaktiver midlertidigt antivirus og firewall^{(Method 1: Temporarily Disable Antivirus and Firewall)}

1. Højreklik på antivirusprogramikonet^{( Antivirus Program icon)} fra proceslinjen, og vælg Deaktiver.^(Disable.)

2. Vælg derefter den tidsramme, som Antivirus forbliver deaktiveret for.^{( Antivirus will remain disabled.)}

Bemærk: Vælg den mindst mulige tid, f.eks. 15 minutter eller 30 minutter.

3. Når du er færdig, prøv igen at oprette forbindelse til WiFi -netværket og kontroller, om fejlen løser sig eller ej.

4. Tryk på Windows-tasten + I og vælg derefter Kontrolpanel.^{( Control Panel.)}

5. Klik derefter på System og sikkerhed.^{( System and Security.)}

6. Klik derefter på Windows Firewall.

7. Klik nu fra venstre vindue på Slå Windows Firewall^{(Turn Windows Firewall)} til eller fra.

8. Vælg Slå Windows Firewall fra, og genstart din pc. ^{(Select Turn off Windows Firewall and restart your PC. )}Prøv igen at åbne Google Chrome og se, om du er i stand til at  ordne installationen mislykkedes i den første opstartsfasefejl.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Hvis ovenstående metode ikke virker, skal du sørge for at følge nøjagtig de samme trin for at tænde din firewall igen.

Metode 2: Se efter Windows Update^{(Method 2: Check for Windows Update)}

1.Tryk på Windows Key + I og vælg derefter  Opdatering og sikkerhed.^{(Update & Security.)}

2. Klik derefter igen på  Søg efter opdateringer^{(Check for updates)} , og sørg for at installere eventuelle ventende opdateringer.

3. Efter at opdateringerne er installeret, genstart din pc og se, om du er i stand til at  ordne installationen mislykkedes i den første opstartsfasefejl.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Metode 3: Kør den officielle Windows Update-fejlfinding^{(Method 3: Run Official Windows Update Troubleshooter)}

Hvis intet virker indtil nu, bør du helt sikkert prøve at køre Windows Update-fejlfinding fra selve Microsofts ^{(Windows Update Troubleshooter from Microsoft)} websted^(Website) og se, om du er i stand til at ordne installationen^{(Installation)} mislykkedes i den første opstartsfasefejl^{(First Boot Phase Error)} .

Metode 4: Kør Windows Update i ren opstart^{(Method 4: Run Windows Update in Clean Boot)}

Dette vil sikre, at hvis en tredjepartsapplikation er i konflikt med Windows -opdateringen, vil du være i stand til at installere Windows-opdateringer^{(Windows Updates)} i Clean Boot . Nogle gange kan tredjepartssoftware være i konflikt med Windows Update og derfor få Windows Update til at sidde fast^(Stuck) . For at reparere installationen mislykkedes i den første opstartsfasefejl^{(Fix The Installation Failed In The First Boot Phase Error)} , skal du udføre en ren opstart^{(perform a clean boot)} på din pc og diagnosticere problemet trin for trin.

Metode 5: Sørg for, at du har nok diskplads^{(Method 5: Make sure you have enough Disc Space)}

For at installere Windows opdatering/opgradering med succes, skal du bruge mindst 20 GB ledig plads på din harddisk. Det er ikke sandsynligt, at opdateringen vil forbruge al pladsen, men det er en god idé at frigøre mindst 20 GB plads på dit systemdrev, for at installationen kan gennemføres uden problemer.

Metode 6: Omdøb SoftwareDistribution-mappe^{(Method 6: Rename SoftwareDistribution Folder)}

1. Tryk på Windows Key + X og vælg derefter Kommandoprompt (Admin).^{(Command Prompt (Admin).)}

2. Indtast nu følgende kommandoer for at stoppe Windows Update Services og tryk derefter på Enter efter hver kommando:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3. Indtast derefter følgende kommando for at omdøbe SoftwareDistribution Folder og tryk derefter på Enter :

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.Til sidst skal du skrive følgende kommando for at starte Windows Update Services og trykke på Enter efter hver kommando:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Genstart din pc for at gemme ændringer.

Metode 7: Registry Fix^{(Method 7: Registry Fix)}

1. Tryk på Windows-tasten + R og skriv derefter regedit og tryk på Enter for at åbne Registreringseditor^{(Registry Editor)} .

2. Naviger til følgende registreringsnøgle:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade

3.Hvis du ikke kan finde OSUpgrade -nøglen, skal du højreklikke på WindowsUpdate og vælge New > Key.

4. Navngiv denne nøgle som OSUpgrade og tryk på Enter.

5. Sørg nu for, at du har valgt OSUpgrade , og højreklik derefter et vilkårligt sted i det tomme område i den højre vinduesrude, og vælg New > DWORD (32-bit) value.

6. Navngiv denne nøgle som AllowOSUpgrade , og dobbeltklik på den for at ændre dens værdi til 1.

7. Prøv igen at installere opdateringerne eller kør opgraderingsprocessen igen og se, om du er i stand til at ordne installationen^{(Installation)} mislykkedes i den første opstartsfasefejl^{(First Boot Phase Error)} .

Metode 8: Slet en bestemt fil, der roder med opgradering^{(Method 8: Delete a particular file messing with upgrade)}

1. Naviger til følgende mappe:

C:\Users\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Orbx

Bemærk: For at se AppData- mappen skal du markere vis skjulte filer og mapper fra Mappeindstillinger^{(Folder Options)} .

2. Alternativt kan du trykke på Windows Key + R og derefter skrive %appdata%\Microsoft\Windows\Start Menu\Programs\Orbx og trykke på Enter for at åbne AppData - mappen direkte.

3. Find nu en fil kaldet Todo under Orbx- mappen. Hvis filen findes, så sørg for at slette den permanent.

4. Genstart din pc, og prøv opgraderingsprocessen igen.

Metode 9: Opdater BIOS^{(Method 9: Update BIOS)}

Udførelse af BIOS -opdatering er en kritisk opgave, og hvis noget går galt, kan det beskadige dit system alvorligt, derfor anbefales en ekspertovervågning.

1. Det første trin er at identificere din BIOS -version, for at gøre det skal du trykke på  Windows Key + R og derefter skrive " msinfo32 " (uden anførselstegn) og trykke på Enter for at åbne Systemoplysninger^{(System Information)} .

2. Når vinduet Systeminformation åbnes, skal du finde BIOS Version/Date og derefter notere producenten og BIOS - versionen.

3. Dernæst skal du gå til din producents hjemmeside for f.eks. i mit tilfælde er det Dell , så jeg vil gå til Dells websted^{(Dell website)} og derefter indtaste min computers serienummer eller klikke på muligheden for automatisk registrering.

4. Nu fra listen over viste drivere vil jeg klikke på BIOS og downloade den anbefalede opdatering.

Bemærk:^(Note:) Sluk ikke for din computer eller afbryd forbindelsen til din strømkilde, mens du opdaterer BIOS , da du ellers kan skade din computer. Under opdateringen genstarter din computer, og du vil kortvarigt se en sort skærm.

5.Når filen er downloadet, skal du blot dobbeltklikke på Exe -filen for at køre den.

6. Endelig har du opdateret din BIOS , og dette kan også  løse installationen mislykkedes i den første opstartsfase-fejl.^{(Fix The Installation Failed In The First Boot Phase Error.)}

Metode 10: Deaktiver Secure Boot^{(Method 10: Disable Secure Boot)}

1. Genstart din pc.

2.Når systemet genstarter Gå ind^(Enter) i BIOS-opsætningen^{(BIOS setup)} ved at trykke på en tast under opstartssekvensen.

3.Find indstillingen Secure Boot , og indstil den om muligt til Enabled . Denne mulighed er normalt enten på fanen Sikkerhed^(Security) , fanen Boot eller på fanen Godkendelse^{(Authentication)} .

#WARNING: Efter at have deaktiveret Secure Boot kan det være svært at genaktivere Secure Boot uden at gendanne din pc til fabrikstilstanden.

4. Genstart din pc og se, om du er i stand til at  ordne installationen mislykkedes i den første opstartsfasefejl.^{(Fix The Installation Failed In The First Boot Phase Error.)}

5. Aktiver igen indstillingen Secure Boot^{(Enable the Secure Boot)} fra BIOS-opsætningen.

Metode 11: Kør CCleaner og Malwarebytes^{(Method 11: Run CCleaner and Malwarebytes)}

1.Download og installer  CCleaner &  Malwarebytes.

2. Kør Malwarebytes^{(Run Malwarebytes)(Run Malwarebytes)} Â og lad det scanne dit system for skadelige filer.

3. Hvis der findes malware, vil den automatisk fjerne dem.

4. Kør nu CCleaner , og i sektionen "Cleaner", under fanen Windows , foreslår vi, at du kontrollerer følgende valg, der skal renses:

5.Når du har sikret dig, at de rigtige punkter er kontrolleret, skal du blot klikke på  Kør^{(Run Cleaner,)} oprydning og lade CCleaner køre sin gang.

6. For at rense dit system yderligere skal du vælge fanen Registrering^(Registry) og sikre, at følgende er markeret:

7. Vælg Scan for Issue , og lad CCleaner scanne, og klik derefter på  Fix Selected Issues.

8.Når CCleaner spørger: " Vil du have sikkerhedskopierede ændringer i registreringsdatabasen? ^{(Do you want backup changes to the registry?)}†vælg Ja.

9. Når din sikkerhedskopiering er fuldført, skal du vælge Fix All Selected Issues .

10. Genstart din pc for at gemme ændringer, og dette ville løse installationen^{(Installation)} mislykkedes i den første opstartsfasefejl^{(First Boot Phase Error)} , hvis ikke, fortsæt med den næste metode.

Metode 12: Kør System File Checker og DISM Tool^{(Method 12: Run System File Checker and DISM Tool)}

1. Tryk på Windows Key + X og klik derefter på Kommandoprompt (Admin).^{( Command Prompt(Admin).)}

2. Skriv nu følgende i cmd'en og tryk enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3. Vent på, at ovenstående proces er færdig, og genstart din pc, når du er færdig.

4. Åbn cmd igen og skriv følgende kommando og tryk enter efter hver enkelt:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5. Lad DISM- kommandoen køre, og vent på, at den er færdig.

6. Hvis ovenstående kommando ikke virker, så prøv nedenstående:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Bemærk:^(Note:)   Udskift^(Replace) C:\RepairSource\Windows med placeringen af ​​din reparationskilde ( Windows Installations-^{(Windows Installation)} eller Recovery Disc ).

7. Genstart din pc for at gemme ændringer.

Metode 13: Fejlfinding^{(Method 13: Troubleshooting)}

1. Tryk på Windows Key + X og vælg derefter Kommandoprompt (Admin).^{(Command Prompt (Admin).)}

2. Indtast følgende kommando i cmd som den (kopier og indsæt den) og tryk på Enter efter hver enkelt:

takeown /f C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log
icacls C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log /reset /T
notepad C:\$Windows.~BT\Sources\Panther\setuperr.log

3. Naviger nu til følgende mappe:

C:\$Windows.~BT\Sources\Panther

Bemærk: Du skal markere " Vis skjulte filer og mapper^{(Show hidden files and folders)} " og fjerne markeringen af ​​" Skjul operativsystemfiler^{(Hide operating system files)} " i Mappeindstillinger ^(Folder) for^(Options) at se mappen ovenfor.

4. Dobbeltklik på filen setuperr.log for at åbne den.

5. Fejlfilen vil have information som denne:

2017-07-07 13:24:01, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadRegFromFile :: OpenFile error (C:\$WINDOWS.~BT\Work\MachineIndependent\Working\srcworking\agentmgr\CCSIAgent\005A4BDD\HKLM-E0xxxx04IME.reg) gle=2
2017-07-07 13:24:07, Error SP Error WRITE, 0x00000005 while gathering/applying object: File, C:\Windows\System32\Tasks [avast! Emergency Update]. Will return 0[gle=0x00000005]
2017-07-07 13:24:07, Error MIG Error 5 while applying object C:\Windows\System32\Tasks\avast! Emergency Update. Shell application requested abort[gle=0x00000005]
2017-07-07 13:24:07, Error [0x08097b] MIG Abandoning apply due to error for object: C:\Windows\System32\Tasks\avast! Emergency Update[gle=0x00000005]
2017-07-07 13:24:08, Error Apply failed. Last error: 0x00000000
2017-07-07 13:24:08, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C
2017-07-07 13:24:09, Error SP Apply: Migration phase failed. Result: 44
2017-07-07 13:24:09, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed.[gle=0x000000b7]
2017-07-07 13:24:09, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]



2017-07-07 17:24:01, Error [SetupHost.Exe] ReAgentXMLParser::ParseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Drivers of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.GDRs of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Langpacks of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.FeaturesOnDemand of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-08 13:30:12, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2017-07-08 13:30:19, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2017-07-08 13:30:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2017-07-08 13:30:40, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2017-07-08 13:31:41, Error CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2017-07-08 13:31:41, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2017-07-08 13:32:03, Error MOUPG CSetupHost::ReportEventW(1618): Result = 0x8024F005
2017-07-08 13:32:03, Error MOUPG SetupHost: Reporting pending reboot event failed: hr = [0x8024F005]
2017-07-08 13:32:03, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

6. Find ud af, hvad der stopper installationen, adresser det ved at afinstallere, deaktivere eller opdatere, og prøv installationen igen.

7.I ovenstående fil, hvis du vil se nøje efter, er problemet skabt af Avast , og afinstallation af det løste derfor problemet.

Anbefalet til dig:^{(Recommended for you:)}

• Ret printerinstallationsfejl 0x000003eb^{(Fix Printer Installation Error 0x000003eb)}
• Sådan rettes NETWORK_FAILED i Chrome^{(How To Fix NETWORK_FAILED in Chrome)}
• Fix Google Chrome error He’s Dead, Jim!
• Fix Windows-indstillinger åbnes ikke^{(Fix Windows Settings won’t open)}

Det er det, du har rettet installationen mislykkedes i den første opstartsfasefejl^{(Fix The Installation Failed In The First Boot Phase Error)} , men hvis du stadig har spørgsmål vedrørende denne vejledning, er du velkommen til at spørge dem i kommentarsektionen.

Fix The Installation Failed In The First Boot Phase Error

Fix The Installation Failed In The First Boot Phase Error: If you are upgrading to Windows 10 or upgrading to a new major update from Microsoft then chances are the installation may fail and you will be left with an error message saying “We couldn’t install Windows 10.” If you look closely you will find some additional information at the bottom which would be an error code 0xC1900101 – 0x30018 or 0x80070004 – 0x3000D depending upon the type of error. So these are the following error which you can receive:

0x80070004 – 0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATE operation.

0xC1900101 – 0x30018
The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.

0xC1900101-0x30017
The installation failed in the FIRST_BOOT phase with an error during BOOT operation.

Now all the above errors are either caused due to incorrect registry configuration or due to device drivers conflict. Sometimes 3rd party software can also cause the above errors, so we need to troubleshoot the issue and fix the cause in order to resolve this error. So without wasting any time let’s see how to actually Fix The Installation Failed In The First Boot Phase Error with the help of below-listed troubleshooting guide.

Fix The Installation Failed In The First Boot Phase Error

Make sure to create a restore point just in case something goes wrong.

Note: Make sure to disconnect any external devices connected to PC.

Method 1: Temporarily Disable Antivirus and Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

5.Next, click on System and Security.

6.Then click on Windows Firewall.

7.Now from the left window pane click on Turn Windows Firewall on or off.

8.Select Turn off Windows Firewall and restart your PC. Again try to open Google Chrome and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Check for Windows Update

1.Press Windows Key + I then select Update & Security.

2.Next, again click Check for updates and make sure to install any pending updates.

3.After the updates are installed reboot your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 3: Run Official Windows Update Troubleshooter

If nothing works till now then you should definitely try running Windows Update Troubleshooter from Microsoft Website itself and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 4: Run Windows Update in Clean Boot

This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order Fix The Installation Failed In The First Boot Phase Error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 5: Make sure you have enough Disc Space

In order to install Windows update/upgrade successfully, you will need at least 20GB of free space on your hard disk. It not likely that the update will consume all the space but it’s a good idea to free at least 20GB of space on your system drive in order for the installation to complete without any problems.

Method 6: Rename SoftwareDistribution Folder

1.Press Windows Key + X then select Command Prompt (Admin).

2.Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

3.Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

4.Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5.Reboot your PC to save changes.

Method 7: Registry Fix

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2.Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade

3.If you don’t find the OSUpgrade key then right-click on WindowsUpdate and select New > Key.

4.Name this key as OSUpgrade and hit Enter.

5.Now make sure you have selected OSUpgrade and then in the right window pane right-click anywhere in the empty area and select New > DWORD (32-bit) value.

6.Name this key as AllowOSUpgrade and double click on it to change it’s value to 1.

7.Again try to install the updates or re-run the upgrade process and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 8: Delete a particular file messing with upgrade

1.Navigate to the following directory:

C:\Users\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Orbx

Note: In order to see AppData folder you need to check mark show hidden files and folders from Folder Options.

2.Alternatively, you could press Windows Key + R then type %appdata%\Microsoft\Windows\Start Menu\Programs\Orbx and hit Enter to directly open AppData folder.

3.Now under Orbx folder, find a file called Todo, if the file exists make sure to permanently delete it.

4.Reboot your PC and again try the upgrade process.

Method 9: Update BIOS

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double-click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may also Fix The Installation Failed In The First Boot Phase Error.

Method 10: Disable Secure Boot

1.Restart your PC.

2.When the system restart Enter the BIOS setup by pressing a key during the bootup sequence.

3.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.

#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.

4.Restart your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

5.Again Enable the Secure Boot option from BIOS setup.

Method 11: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes and this would Fix The Installation Failed In The First Boot Phase Error, if not then continue with the next method.

Method 12: Run System File Checker and DISM Tool

1.Press Windows Key + X then click on Command Prompt(Admin).

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes.

Method 13: Troubleshooting

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd as it (copy and paste it) and hit Enter after each one:

takeown /f C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log
icacls C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log /reset /T
notepad C:\$Windows.~BT\Sources\Panther\setuperr.log

3.Now navigate to the following directory:

C:\$Windows.~BT\Sources\Panther

Note: You need to check mark “Show hidden files and folders” and uncheck “Hide operating system files” in Folder Options in order to see the above folder.

4.Double click on the file setuperr.log, in order to open it.

5.The error file will have information like this:

2017-07-07 13:24:01, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadRegFromFile :: OpenFile error (C:\$WINDOWS.~BT\Work\MachineIndependent\Working\srcworking\agentmgr\CCSIAgent\005A4BDD\HKLM-E0xxxx04IME.reg) gle=2
2017-07-07 13:24:07, Error SP Error WRITE, 0x00000005 while gathering/applying object: File, C:\Windows\System32\Tasks [avast! Emergency Update]. Will return 0[gle=0x00000005]
2017-07-07 13:24:07, Error MIG Error 5 while applying object C:\Windows\System32\Tasks\avast! Emergency Update. Shell application requested abort[gle=0x00000005]
2017-07-07 13:24:07, Error [0x08097b] MIG Abandoning apply due to error for object: C:\Windows\System32\Tasks\avast! Emergency Update[gle=0x00000005]
2017-07-07 13:24:08, Error Apply failed. Last error: 0x00000000
2017-07-07 13:24:08, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C
2017-07-07 13:24:09, Error SP Apply: Migration phase failed. Result: 44
2017-07-07 13:24:09, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed.[gle=0x000000b7]
2017-07-07 13:24:09, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]



2017-07-07 17:24:01, Error [SetupHost.Exe] ReAgentXMLParser::ParseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Drivers of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.GDRs of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Langpacks of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.FeaturesOnDemand of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-08 13:30:12, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2017-07-08 13:30:19, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2017-07-08 13:30:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2017-07-08 13:30:40, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2017-07-08 13:31:41, Error CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2017-07-08 13:31:41, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2017-07-08 13:32:03, Error MOUPG CSetupHost::ReportEventW(1618): Result = 0x8024F005
2017-07-08 13:32:03, Error MOUPG SetupHost: Reporting pending reboot event failed: hr = [0x8024F005]
2017-07-08 13:32:03, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

6.Find out what is stopping the install, address it by uninstalling, disabling or updating and retry the installation.

7.In the above file if you will look closely the issue is created by Avast and hence uninstalling it fixed the issue.

Recommended for you:

• Fix Printer Installation Error 0x000003eb
• How To Fix NETWORK_FAILED in Chrome
• Fix Google Chrome error He’s Dead, Jim!
• Fix Windows Settings won’t open

That’s it you have successfully Fix The Installation Failed In The First Boot Phase Error but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Related posts

• Ret printerinstallationsfejl 0x000003eb

• Ret Unmountable Boot Volume Stop Error 0x000000ED

• Ret Inaccessible Boot Device Fejl i Windows 11

• Ret fejl 0X80010108 i Windows 10

• Sådan rettes applikationsfejl 0xc0000005

• Ret U-Verse Modem Gateway Authentication Failure Fejl

• Ret Windows Update-fejlkode 0x80072efe

• 4 måder at køre diskfejlskontrol i Windows 10

• Ret Windows Update-fejl 0x800704c7

• Ret utilstrækkelige systemressourcer til at fuldføre API-fejlen

• Ret Windows 10 installation mislykkes med fejl C1900101-4000D

• [RETTET] Windows Update-fejl 0x80010108

• Ret Steam-applikationsindlæsningsfejl 3:0000065432

• Rette Minecraft-fejl Kunne ikke skrive Core Dump

• Din pc er ikke forbundet til internettet Fejl [LØST]

• Ret netværksadapterfejlkode 31 i Enhedshåndtering

• Sådan rettes applikationsfejl 523

• Ret Windows Store Cache kan være beskadiget fejl

• Ret Windows Update-fejl 0x80070020

• Fix Developer Mode-pakken kunne ikke installere Fejlkode 0x80004005